You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I wanna connect my Astatic 1104-C to my Radio Shack HTX-10, and I was wondering if anyone had the pin-outs? One guy told me to follow the D-104 wiring, but I figured that I better check first.
Pin 1 - White (Audio)
Pin 2 - Black (Receive)
Pin 3 - Red (Transmit)
Pin 4 - N/C
Pin 5 - Shield (Common/Ground)
Pin 6 - N/C
I also read that a power mic really isn't suggested for this radio, but one can be used if you keep the gain turned down so you don't overdrive it. I would also slide a piece of shrink tube over pin 6 in the mic plug to prevent anything from accidently touching it and sending voltage through the mic/radio possibly causing damage. Use this info at your own risk...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.