• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Midland 13-882 manual and schematic

sunbulls

Sr. Member
I Support WorldwideDX.com!
Apr 25, 2017
1,158
2,114
273
77
Midland had 3 versions of the 13-882. This covers the earliest “plain version” that CB tricks omitted. The stand out feature in some of these early crystal matrix radios are the two transformers some of them utilized in the audio chain. I found this particular radio a little strange concerning their impedance matching scheme. This oldest version has a 16 ohm speaker in series with a 33uf electrolytic cap. It’s interesting to see the progress that took place in a relatively short period of time with the later B and C versions. Hopefully the transformers are still good if you ever plan to restore their first version, otherwise I suggest finding another parts radio. The common single transformer that’s utilized in the B and C will be of no help. The C version is the most popular with its O2A chip. I can’t grab those up fast enough at a garage sale if the price is reasonable.

Midland 13-882 schematic.jpg
 

Attachments



dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.