• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Midland 77 250 CXL weak audio

Staybolt

Sr. Member
Mar 20, 2013
1,098
458
113
Anyone know a few tips to get more audio out of this neat little radio? Ive looked online and i cant find any info on it.. Like where the limiter is so i can cut it..
 

Anyone know a few tips to get more audio out of this neat little radio? Ive looked online and i cant find any info on it.. Like where the limiter is so i can cut it..



here is all found on the 77-250 midland

mod--RV201 or cut d203

am power-- L304,305,306,307

here is some more I just found. should be to increase swing on the radio

#1 ~ Change R202 (1K) to a 470 Ohm
#2 ~ Change C320 (62pf-NPO) to a 120pf-NPO
#3 ~ Change R316 (3.3) Ohm to a .47 ohm
#4 ~ Re-tune L304, L305, L307 for Maximum forward with Radio HOT!

do not know how acurate this info is.
 
that is all I could find for the 77-250 radio. so no telling what can be found. that is info from some old listings for the radio.
 
i have a 77250 dated 1987 that i am trying to wire a mike too... it is different than the 77250 c x l models looks the same but no chrome and the mike wiring seems to be different
 
thats easy to do. just look for the ground or shield wire then put a jumper on it and touch the pins of the socket . it will either receive or Tramsmit. the other wire will be audio.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello