Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Mike wireing help

Grogan

Grogan

W9WDX Amateur Radio Club Member
Oct 1, 2011
1,139
363
93
Southern New Jersey
I have an Magnum S45HP and was going to wire in a Shure mic and a mixer, The 4 pin uses a standard 4 pin cobra Mic, when I make my switch box do I wire it with a DPDT momentary switch like cobra mics use. or can I just break the audio from the mic with a momentary SPST momentary on the audio lead.
Please help here is needed.... Thanks!
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom