• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

MORE radio test equipment!

guitar_199

Sr. Member
Mar 8, 2011
1,039
1,419
173
Deer Park, TX
Just today picked up a Boonton 102-F AM-FM RF Generator for $149.

I was thinking it was Chinese import but apparently Boonton (in Boonton, NJ by the way!) has been around since at least the 40's and the guy tells me that when this thing hit the market in the mid-seventies or so.... it had a price tag of at least $12.9K.

450 Khz -520 Mhz, AM-FM modulation, built in frequency counter (which can be fed externally!), built in stepped attenuator ( -130 db to (I think) +15 db). Four crystal ovens AND a PLL based lock feature that locks it on the frequency you set.

I'm in lust!
 

Nice score for sure!!


43875_1_.JPG
 
Because of a heavy work schedule, I have not been able to run it through it's paces....but... the first thing that we did is establish that we are both licensed hams...which pleased HIM no end!! He was happy that he had found an appropriate home. According to him.... it is not only working....but was calibrated by a calibration lab 6-8 years ago. That may not be current by some standards....but it is good enough for me....for now.

I'll get her rung out and let you know.

Right now.....I'm gassed!!!!!!!!!!!!

Looks good . . . does it work?
If it does; I think you SCORED!
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.