• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Most Powerfull 2950 on the planet!!!!!!!!!!!!!!!!!!!

dxhound

Active Member
Nov 17, 2006
778
62
38
I am selling a radio I built about 4 years ago and that has served me flawlessly for those years.

This 2950 produces a true honest to goodness 600 watts. I used the amplifier off a connex 4300-400 (uses four 2879's) and am driving it with an RFX75 that has been throttled back to 50 watts. The radio has also had an on off switch added to the back of it to turn off the amplifer so it can be used for car to car comms. The radios audio is VERY clean and I get excellent audio reports on AM FM and SSB. The AM carriers with amplifier on are from 15 watts to 140 watts. The radio has two microphones. The original and an astatic noise canceling mic. This is a killer radio and the only reason Im selling it is to upgrade to another TS480HX

The pictures below are from my phone and really bring out the worst in the radio, showing every little blemish. I rate my rigs stingy on the looks scale and this one is a solid 8.5!! Everything works FANTASTICALLY!!!! First $500 gets her shipped to your door insured in the 48
 

Attachments

  • IMG_20121222_203818.jpg
    IMG_20121222_203818.jpg
    116.3 KB · Views: 10
  • IMG_20121222_203829.jpg
    IMG_20121222_203829.jpg
    85.8 KB · Views: 9


dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.