Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

moxon rectangles

D

darkrfoverlord

Guest
anyone ever build and or use one? I have all the material cut and bent just need to assemble and get it up in the air. just wondering what i should expect for performance since i don't live in a free space, perfect ground isotropic world.


CDX-251 2SF251 </p>
 

anyone ever build and or use one? I have all the material cut and bent just need to assemble and get it up in the air. just wondering what i should expect for performance since i don't live in a free space, perfect ground isotropic world.


CDX-251 2SF251 </p>
 
finally assemble it. bit touchy for adjusting swr. 1.2 :1 on 27.385 swr climbs steeply below 27.00 but i constructed it for the uppers above 27.385. decent side rejection seems to be better than the 2 ele. yagi i made. f/b good made contact with an arkansaw station right away 25w pep antenna tested @ 18ft above the ground on my test mast light wieght only 6.3 lbs. 12' 10" long and 5'6 " wide. it works and it was free. now it's on to a 5/8 verticle for my stock madison for local work.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Tim Chambers:
    Pres. Bill 2 FCC mod just posted
  • @ AWP:
    Is it possible to be on a lake and have a homing directional beam being emitted from the shore so a person could navigate to that beam's source? For example at night to a jetty.
  • @ BJ radionut:
  • @ BJ radionut:

    June VHF

    The American Radio Relay League (ARRL) is the national association for amateur radio, connecting hams around the U.S. with news, information and resources.
    www.arrl.org www.arrl.org
  • @ wavrider:
    sea que sea que,


      Top Bottom
      Back