• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Murs Freq

  • Thread starter Thread starter ranger
  • Start date Start date
R

ranger

Guest
I was looking at the murs freq, and the question that i have is that i have heard people talking in my area on 151.625 and i think this is below the murs starting freq is this so ?

Also i have been to the murs info site and was wondering are ther more than the 5 channels ? Can you go in between what they have listed on there site ? If so could someone post all freq for me ? Or how many channles are there all together ?

What there steps between channles ?

Thanks again to all that reply for the help.

<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/roll.gif ALT=":rollin">




</p>Edited by: <A HREF=http://pub86.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=ranger@worldwidecbradioclub>ranger</A> at: 7/15/03 3:55 am
 

Ok inspector spill the beans on how this conversion is done. You peaked my interest on this one. Why would it only put out 1 watt on MURS and 5 watts on the other freqs?

fasteddy


fasteddysig.gif


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.