• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

My D-104 Golden Eagle

AK #5

Well-Known Member
I Support WorldwideDX.com!
Oct 31, 2014
325
326
73
Murray KY.
This mic sounds just as nice as it did 47 years ago when it was new. I got this when I bought a brand new Browning Golden Eagle Mark III in 1976. Old equipment never dies, it just gets better with age :)
 

Attachments

  • 20230502_172014.jpg
    20230502_172014.jpg
    870.7 KB · Views: 30

Beautiful mic. You might want to recap the board. Those electrolytics are pretty long in the tooth. Did my 1980 Silver Eagle. Piece o cake. Definitely improved it.

73
 
There's just a smidge of pitting on the base, but that's normal for an almost 50 year old microphone. Thinking of maybe having the base replated, or might just leave it original.
It works just fine at the moment, but it's definitely going to get gone through.
 
I was just going through my climate controlled storage, and found this mint night K eagle I bought back in 1994. I used it with my Ranger 2995DX for 10 minutes or so before boxing both back up in 2004. Still looking for the 2995. I also have a 60th Anniversary Diamond Eagle stashed in there somewhere :)
 

Attachments

  • 20230511_153922.jpg
    20230511_153922.jpg
    746.7 KB · Views: 5
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.