You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I roll the tube around a large piece of PVC to form the coil, and then pull the spaces apart by hand to acheive more even separation between each wrap of the coil.

Yes. The PVC insulator in the middle breaks the upper from the lower tube so that the current has to use the coil to make the connection between the two shafts.

[QUOTE="HomerBB, post: 248867, member: 8569"] I roll the tube around a large piece of PVC to form the coil, and then pull the spaces apart by hand to acheive more even separation between each wrap of the coil. Yes. The PVC insulator in the middle breaks the upper from the lower tube so that the current has to use the coil to make the connection between the two shafts. [/QUOTE]

Top Bottom