You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
notice in the schematic that the pins on the DIN connector don't appear to be in numerical order from one side to the other.
look closely at your mic plug and the jack on the radio to see if this is the case in reality.
don't just assume that the one next to pin 1 is pin 2.
from the schematic it would appear that your wiring goes like this
(obviously the turner mic handbook should be used if my info differs from it):
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.