Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

NEW 148 GTL - D

  • Thread starter Thread starter riq165
  • Start date Start date
R

riq165

Guest
Brain trust-



I am looking for schematics for the new Cobra 148GTL-D. It does not have the NW watch or ST. I know these are not the greatest version of this chassis, but this is what I have to work with. It has an interesting sub board mounted that is labeled "148 NW latchup reset" and is connected to the 8719.



Justin I remember you mentioning in an earlier post about a resister that should be changed out to a higher wattage near the vco. Are there any other stability mods you would be willing to share?



Thanks,



riq165



riq165@yahoo.com


</p>
 

Brain trust-



I am looking for schematics for the new Cobra 148GTL-D. It does not have the NW watch or ST. I know these are not the greatest version of this chassis, but this is what I have to work with. It has an interesting sub board mounted that is labeled "148 NW latchup reset" and is connected to the 8719.



Justin I remember you mentioning in an earlier post about a resister that should be changed out to a higher wattage near the vco. Are there any other stability mods you would be willing to share?



Thanks,



riq165



riq165@yahoo.com


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom