• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

New Yaesu FT 450D with Auto tuner. Question


If your amp has a tuned input and is set correctly on each band
(less than 1.5/1 vswr between radio and amplifier) with amplifier ON
Then there is no need to engage the tuner...leave it OFF
All the Best
Gary
 
If your amp has a tuned input and is set correctly on each band
(less than 1.5/1 vswr between radio and amplifier) with amplifier ON
Then there is no need to engage the tuner...leave it OFF
All the Best
Gary
In put is/will be tuned, and my talk zone is at worst 1.2 swr with X=0, R=58.
Thanks for the help. I may have to get a tunner then that can take a dx500 so I can play with wire antennas this winter.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello