the only way the dollar match will work at 27mhz. is if the load is (shorter than a 1/4 wavelength) capacitively reactive.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Winners of the three Retevis radios 16 Anniversary giveaway are announced!! Click Here to find out if you won!
Next Question
- Thread starter JDWilbourn
- Start date
now you mention it the arrl does say shorten the radiator to make it capacitively reactive but i dont have it handy to look it up,
would the tuning tip do the trick?
what about the wire from feedpoint to coax outer shield?,
i suppose the same applys the antenna needs to be somewhat capacitively reactive,
i await your other solution with anticipation
would the tuning tip do the trick?
what about the wire from feedpoint to coax outer shield?,
i suppose the same applys the antenna needs to be somewhat capacitively reactive,
i await your other solution with anticipation
do you own or have access to a grid dip meter and/or an antenna analyzer? you need to have some way to measure the resonant frequency of tuned circuits. either one of those will do.