• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Old Connex 3300 Frequency Problem

Low_Boy

Sr. Member
Jan 21, 2010
1,880
1,144
173
Rochester N.Y.
I have been poking around on this old dirty Connex radio and cant find the problem. It acts like there is a bad solder connection but that is not it. The frequency is all over the place as soon as I touch The center antenna lead or coil L31, L52 or L51 the radio goes right to frequency. It will also go to frequency if I touch the emitter or collector of the final or driver. I checked all the ceramic disc capacitors associated with the mentioned parts and they were not shorted. Any one have any ideas?
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Roadstar:
    good morning to all and Happy Thanksgiving to all:giggle:
  • dxBot:
    Greg T has left the room.
  • @ BJ radionut:
    solar storm report
  • @ k3zl:
    I am installing a G5RV and wanted to know if there is a way to enhance prior to installation.