H
hossless
Guest
I need help wiring the stock mic to my Omegaforce s45.
I had a 636 on there and I only had to solder 4 wires to the connector bypassing the +13.8 VDC pin#6 and the Up/Down Freq. pin#4.
I had the stock mic just about finished and I realized I had to solder wires to all 6 pins on mic connector. Anyone know which wire goes to pin #4 Up/Down Freq. and pin # +13.8 VDC
on the mic connector.
I've got this radio traded with a forum member for 2 148's and I need to finish wiring this asap so I can ship it out to the man in the morning.
Thanks, Hossless
</p>
I had a 636 on there and I only had to solder 4 wires to the connector bypassing the +13.8 VDC pin#6 and the Up/Down Freq. pin#4.
I had the stock mic just about finished and I realized I had to solder wires to all 6 pins on mic connector. Anyone know which wire goes to pin #4 Up/Down Freq. and pin # +13.8 VDC
on the mic connector.
I've got this radio traded with a forum member for 2 148's and I need to finish wiring this asap so I can ship it out to the man in the morning.
Thanks, Hossless
</p>