I have the amp listed in the subject. I noticed today, that the input tune was high, this is a new to me amp. I know the coax is fine and antenna, I've been thru that. This amp has two pills, not FETs inside, I noticed on top of the transformer the silver mica cap was burnt and it measured about 230pf. I removed it and I could not really read the writing, but it looked like 1000pf at 500 volts. I replaced it with something close and the input tuning came down to about 1.5, which was an improvement on the 2.0 swr I did have. The other cap on the output transformer I could clearly read at 750pf. I cannot find any schematics on it, I was hoping maybe someone had some knowledge.
My only other recourse is to buy an assortment and play with different ones.
My only other recourse is to buy an assortment and play with different ones.
