Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

power input for a KLB-240 power amp

J

johnxb351

Member
Sep 22, 2015
23
13
13
57
Hi All I have a KLB-240 POWER AMPLIFIER what size amps power supply will i need to run amplifier. Can i run radio and amplifier off the same power supply. thanks
 

KLB240's have a pair of 2sc2290's, usually draw 16-20a if its not been fiddled with,

I would want a supply capable of 25a continuous or higher for the amplifier & 30a or higher if you want to run rig from same psu.
 
  • Like
Reactions: freecell and Tokin
I agree with Bob, 30 amps will work good.
A 50 amp would be a little overkill but in some cases a little overkill is ok.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom