Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

power supply for icom 706mkiig?

  • Thread starter Thread starter rmacleod
  • Start date Start date
R

rmacleod

Guest
I want to find a power supply that will provide enough amps for the radio. I was looking at 1 stop electronics, but i dont know which power supply to look at....any one know what i need. will a 30 amp ps be good enough for 100 watt tx???


</p>
 

As said 20 amps is enough for the radio but more is nice to have.I have a Tripp-Lite PR-40a rated for 40 amps and I run my Yaesu FT-857 on it as well as a 2m mobile,a 2m 80 watt amp and several low power accesories.That solves the wall wart problem well.


FT-857_web.jpg
Garth 9VE01 PE993 CDX993 Learn from others mistakes.You can not live long enough to make them all yourself.</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom