Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Program DTMF tones for Wouxun KG-UVD1P?

N

n1bru

Member
Apr 7, 2011
2
0
11
Does anyone know how to program into the DTMF memory of the KG-UV3D Wouxun?? The manual is VERY CONFUSING. I have the 12 digit code for APRS but don't know how to get it into DTMF memory.:cursing:
Thanks:thumbup1:
N1BRU
 

There isn't a way to program DTMF tones for quick memory retrieval on that radio. You have to do it the "old fashioned" way by holding the PTT and pushing the buttons.

I'm not sure what you meant by "12 digit code for APRS", though. APRS doesn't use DTMF.
 
I have this radio and am use to pressing the PTT and punching in DTMF codes to access things. The problem I came up to was a new set of repeaters I found that use use A,B,C, and D. I can key up 0 to 9, *,and # but how do I key up ABC and D on this radio?
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom