• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Ranger 2950 dx and TS DX 350 HDV

Grogan

W9WDX Amateur Radio Club Member
Oct 1, 2011
1,139
363
93
Southern New Jersey
Great info on the Omega Force S45hp thread about amps I am use an Imax2000 with a 2950 dx and TSDX350HDV love the combo for 10 ssb I turn the radio to about 4 watts and If I can hear them I usually am next in line for a contact, Maby the d104m6b helps, 2x2879 in the amp Am i hurting the amp with the 2950 and is it possible to use it low power on am.The low side of my radio is supposed to be set at 2 watts but the shop set it up to 4 for some reason.I don't want to set it lower till the warrenty is up as to the shop put sticker on it. The amp is mounted to a low speed and fairly quiet 4x4 axial fan as well. Thanks for the help Steve
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.