• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Notice: You may not use this site to facilitate the unauthorized selling of copyrighted material including, but not limited to, in the public dxForums, dxGallery, dxChat and private messsages. If you get caught doing this, you will be permanently banned with no second chances. A notice will be placed on the site of why you were banned and any information collected by this site about you will be made known to the copyright holder.

Ranger 2995 DXCF

RidgeRunner260

Active Member
Jun 28, 2021
43
40
28
43
I have a ranger 2995 DXCF that I believe is 100hz high in frequency. AM seems fine, but I noticed on LSB when I turned my radio to channel 37 (27.3750) that actually using the VFO and tuning to 27.3749 puts me right on channel 37. I found the 2995 DX manual online detailing the alignment points, but this is a rather new radio and I know that its been thru many variations. Wondering if anyone can confirm the SSB alignment information. I also made sure the radio was warmed up before checking this on SSB.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ f4joc:
    is this amp still available and where is it shipping from??
  • @ ButtFuzz:
    " f4joc: is this amp still available and where is it shipping from??" Antecedent, please...
  • @ ButtFuzz:
    Meaning: There's a whole lot of "this amp"
  • @ ButtFuzz:
    Good Morning!
  • dxBot:
    TelSat has left the room.