-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Ranger 6900f 150 amp question.
- Thread starter Ed c
- Start date
It has been done. You need to know what you're doing or you can mess things up in both the radio and the amp.
Just don't bolt it to a radio with two final transistors. It was meant only for the drive level from a single final. Driving it twice that hard will shorten the life of the RF transistors.
Using the hookup to the old radio pc board as a guide will work best if the 'new' radio has the same or a similar circuit board. And if it's very different the skill level needed will be higher.
Upgrading a carburetor is always easier when the mounting holes line up same as the old one.
73
Using the hookup to the old radio pc board as a guide will work best if the 'new' radio has the same or a similar circuit board. And if it's very different the skill level needed will be higher.
Upgrading a carburetor is always easier when the mounting holes line up same as the old one.
73
