Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

RANGER RCI 2995DXCF SSB Power issue

C

Crambone

Well-Known Member
I Support WorldwideDX.com!
Jan 22, 2019
563
175
53
57
AM is working perfect but on LSB & USB if I have the RF Power more than 25% when I key I’m seeing a full carrier? Receive sounds good on both LSB and USB.

Drew
 

Crambone said:
AM is working perfect but on LSB & USB if I have the RF Power more than 25% when I key I’m seeing a full carrier? Receive sounds good on both LSB and USB.

Drew
Click to expand...
Drew,
The 2 things that come to mind is the background audio is too loud and causing transmit power or the carrier balance pot (VR7) is not aligned.
 
Lkaskel said:
Drew,
The 2 things that come to mind is the background audio is too loud and causing transmit power or the carrier balance pot (VR7) is not aligned.
Click to expand...
Thanks I will check that, I had the microphone gain all the way down and tried also I will look at VvR7
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom