• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

rci 2950 bulbs

TonyV225

W9WDX Amateur Radio Club Member
Apr 18, 2005
5,824
331
143
Wisconsin
Im having issues with my 2527 lights in the display and was going to just replace them and if memory serves me correct Are these 6 or 7 volt 5mm bulbs? I have everything a guy could want but the closest I have are blue 5 volt LED 5mm bulbs where do I get replacement bulbs and what is the actual voltage rating on the bulbs? I know there are orange caps that can be swapped over to the new bulbs.
 

Im having issues with my 2527 lights in the display and was going to just replace them and if memory serves me correct Are these 6 or 7 volt 5mm bulbs? I have everything a guy could want but the closest I have are blue 5 volt LED 5mm bulbs where do I get replacement bulbs and what is the actual voltage rating on the bulbs? I know there are orange caps that can be swapped over to the new bulbs.

http://www.worldwidedx.com/cb-band-cb-radios/27103-voltage-rci-2950-display-bulbs.html
 
Thanks I was looking for this link I posted this one a month ago or so and couldnt remember what section I put it in and felt like a dumb@$$ asking again ;)

Im wondering if these 5 volts would be ok if I used the middle or low setting on the dimmer since I never use the high setting on any of my radios.

I ordered some other LED in my last A1 Telecom order but have to see what the voltage is on these new ones.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.