Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Rci-2950 Help

  • Thread starter Thread starter Grizzbear0
  • Start date Start date
G

Grizzbear0

Guest
I have a Rci-2950 (old version) that seems to be suffering from Front End Overload (stations within a few miles sounds garbled) , I have done the mods (R49-100K to a 470K and R78-2.2K to a 6.8K) also have replaced D34 and D35, Still the same problem, SSB seems to be fine on it. I have also i have noticed the RX meter (bar) does not work, but on transmit it lights up..



Any Help Greatly Appreciated,



Thanks..


</p>
 

I have a Rci-2950 (old version) that seems to be suffering from Front End Overload (stations within a few miles sounds garbled) , I have done the mods (R49-100K to a 470K and R78-2.2K to a 6.8K) also have replaced D34 and D35, Still the same problem, SSB seems to be fine on it. I have also i have noticed the RX meter (bar) does not work, but on transmit it lights up..



Any Help Greatly Appreciated,



Thanks..


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom