Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

RCI 2950

crkfngr

crkfngr

Member
Sep 17, 2008
70
2
18
71
Question.gif

I just aquried a RCI 2950. I have been using cbtricks.com documents to tune this radio. I am having trouble finding L34 to check the mike gain it says to turn it clockwise, its got to be a pod. Also the led meter light on the recieve part is not right, I get a signal from my neighbor and I know the LED Meter should read full bars, but it is only reading it as 2 bars. I found VR8 to adjust signal meter for transmit. but no info on which one to turn for incoming signal.

Please Help
73's
Crkfngr
 

Best bet would be to start with a complete alignment. The proper steps are on cbtricks.com . The S meter is one of the steps. This is assuming you have the proper equipment to do an alignment.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom