Hi, I had just got a new RCI 2950DX blackface model and when doing the E-chip conversion I noticed a small board about the size of a dime or nickel that was very loose it was just glued to a rubber piece. I believe it goes to the mic connection. Anyway it is not stuck on there very well at all and it came loose easily. You don't want this floating around in the radio and shorting out something. I put tape around it and attached it to some wires with a small zip strip out of the way so it wont ever come in contact with anything. Just a warning here to let people know about a potential problem that could arise.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
RCI 2950DX blackface warning/tip
- Thread starter drifter291
- Start date
- No one is chatting at the moment.
-
-
-
@ BJ radionut:I am beginning the packing process...XENIA bound Going "Lite": this year....2 items for sale...Rig #1 = FT-920/Gud to Ex condition/Hand Mike/pwr cord/manual (NO BOX) ... #2 = My 1 owner FT-950....EX condition...Original Shipping Double Box/Factory Manual/Never used hand mike...Booths 9107-9111...Ya'al come by say hello...
-
@ BJ radionut:
Incoming Region Produces X3 Solar Flare May 15, 2024 @ 14:55 UTC Another major solar flare, but this time from an active region just beginning to turn into view off the east limb. It is possible that the group responsible is old AR 3654 from the previous rotation. The latest flare, an X2.99 event just peaked at 14:38 UTC (May 15). Stay tuned -
