RCI 2950dx or President Lincoln

[jdchet]

Properly tuned they'll both probably talk about the same...give or take......<img src=http://users.joplin.com/dutch64804/posticon36.gif ALT=":36"> Now if ya want an opinion on the receive side of the deal the Lincoln wins <img src=http://users.joplin.com/dutch64804/posticon51.gif ALT=":51"> hands down!<img src=http://users.joplin.com/dutch64804/posticon24.gif ALT=":lmao">

And don't sell the RX side short.....my HR2600(same radio, just a little older) has a receiver that is very sensitive, without picking up every electrical burp and fart that goes on in my big truck. This same vehicle caused me to sell a great talking 2950DX because the RX was too noisy when the engine was running! Nice and quiet with the HR2600 and picks up good signals from much further away than anything else I have<img src=http://users.joplin.com/dutch64804/posticon36.gif ALT=":36"> !



JD<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/pimp.gif ALT=":hat">

</p>

 

[JustinDePolis2]

I would personally prefer the Lincoln for the receiver.


Click Here To Go To FG Best Communications

</p>

 

[Old Pirate56]

Hi Guys which is the better radio RCI 2950DX or the President Lincoln, Planning on using whichever is best to run a 400w amp.



Thanks



Murray


</p>

 

[JustinDePolis2]

Well, I personally have talked to people at Ranger and they state that "people buy the radios, so why should be change the design?"


Click Here To Go To FG Best Communications

</p>