Hi, I can't find any info on this revision of board, the closest I can find is the 990010X on cbtricks. Does anyone know of any source for schematic?
Thanks
Thanks
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
RCI 6900F w/EPT990013B
- Thread starter Cable Guy
- Start date
Try here
I am on my phone so I can't extract the file but I think this is the service manual.
73
Jeff
. Rare and Ancient Equipment ranger Ranger RCI-6900 F25.rar - Service Manual Free Download
Download ranger RCI-6900 F25 . Rare and Ancient Equipment ranger Ranger RCI-6900 F25.rar ✅ Various electronics service manuals
www.eserviceinfo.com
I am on my phone so I can't extract the file but I think this is the service manual.
73
Jeff
Thanks Jeff, but that is the same info as on cbtricks with the 990010Z board.
Anyways, this radio has an issue I haven't solved yet. After alignment, which is spot on, AM seems great, but SSB on the LO bands is watery on TX and RX. SSB on the HI bands are clearer, but slightly distorted. I followed the LO/HI switch to the separate xtal oscillators/varactors, and each xtal oscillator has it's own set of 3 inductors, for AM/LSB/USB. I looked at the varactor for the LO osc, its okay. Then I looked at the xtal, it's okay also. Voltages steady. So I though maybe balance modulator, but it does it mostly on LO, with only slight distortion on HI, and I figured it would do it equally on LO and HI if the BalMod was screwy, but I could be wrong.
I'm also thinking FL3, the xtal filter could be at fault, seeing as how it does appear to be a frequency issue as far as I can tell, like I said, slight distortion on the HI bands, and gets worse the lower you go. IDK yet.
I'm also thinking FL3, the xtal filter could be at fault, seeing as how it does appear to be a frequency issue as far as I can tell, like I said, slight distortion on the HI bands, and gets worse the lower you go. IDK yet.
Last edited: