• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Real CB Radios are side mic

Be careful with the Side-Mic son,

R.61e775a02318a19d4a01aa17ef97b792

'Er, you might get the Hammies' all riled-up and an' jealous of us side-mic'ers - they'll come a crashin' our party soon enuff...
 
Since side mic is top shelf

83815DC3-D972-4196-9352-1508FB0C4A82.jpeg

. . a 90-degree microphone cord adapter is a handy addition where that cord has to make a constant flexed turn if the radio is directly above the mic as used.

Most big trucks mount the radio in the overhead, so any mic jack location COULD benefit. Otherwise use strain relief.

My radio is center-mount overhead, but the mic cord is already towards the drivers hand, so a zip tie attached to the shelf works to “locate” that cord in conjunction with a GEARKEEPER.

B9198978-3737-4230-9386-BEF718AA0102.jpeg
.
 
Last edited:
Ah yes, the Right-angle Electron Spinner injector -

Just the perfect accessory to accelerate those particles and slam them into the board, in the RIGHT direction to instill fear into all the components involved and force them to cooperate or else...

...Wind up in a Front Face Mic Mount mobile destined for mudduckville ...
 
Ah yes, the Right-angle Electron Spinner injector -

Just the perfect accessory to accelerate those particles and slam them into the board, in the RIGHT direction to instill fear into all the components involved and force them to cooperate or else...

...Wind up in a Front Face Mic Mount mobile destined for mudduckville ...


A special reversed faceplate is available for those folks south of the Equator to operate their radios upside-down and preserve correct electron-spin.

.
 
Last edited:
  • Like
Reactions: Eldorado828

dxChat
Help Users
  • No one is chatting at the moment.