Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Realistic TRC 55 Base set-up

Tripple Nickel

Tripple Nickel

Active Member
Jun 21, 2013
147
19
28
84
Monroe, Georgia USA
Passed to me from a close friend, a really nice vintage type radio. It has not been used in about 10 years, closet kept no moisture.
Plugged in and all seems well, Mic keyed, ON AIR lamp comes on, least bit of noise MODULATION lamp comes on as well. Meter shows good SWR, there is no noise except a HUUM. Antenna connection is good, tried on different Antennas, still no noise. Squelch seems to efferct needle operation, just no receive. Is it something simple, PO said when last used was working good, who knows. Any help would be appreciated, it's just to nice of a base station to discard.
555 :headbang
 

thank's for the website, I had already found it, but being a stranger to the inside of a radio, and especially schematics, I'm lost. I was just hoping it would be simple. 3's to you and yours.
555
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom