Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recieve amp?

  • Thread starter Thread starter rmacleod
  • Start date Start date
R

rmacleod

Guest
TO make this quick, are recieve amps leagal under FCC regulations? Due to current solar conditions and my location i can call people but the signal i get in return is usualy to faint to understand. Does an recieve amp due the same as turning my RF gain nob to higher setting?



Thanks

rmacleod

2-CDX-174

<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/happy.gif ALT=":D">


</p>
 

Yep, perfectly legal. Keep in mind that it will amplify the noise also. A pretty good solution for this that works well for me is to also use a DSP speaker like the ClearSpeech with the pre-amp. The DSP will kill quite a bit of noise, leaving you more voice pattern audio.



Moleculo


</p>
 
Dosy makes a cheap one for CB, about $90. 1Stop has 'em new. You can find these and others used.





Moleculo


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom