You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

Another update...
So I did check the for mentioned regulators and resistors and all checked good. While I was looking everything over on the top side I did see a resistor soldered on top of R202. So I thought I would unsolder it and low and behold TX on SSB come back in full. Not sure why they had an extra resistor there?

So the only issue now at this time is the S meter. Its like it doesn't register anything under an S7. I replaced c35 and c98 twice and vr1 and still the same. I have also checked it with a new meter and also still the same.

Hopefully we can get this last part figured out.

73

Richard

[QUOTE="RichardHartman, post: 788312, member: 54277"] Another update... So I did check the for mentioned regulators and resistors and all checked good. While I was looking everything over on the top side I did see a resistor soldered on top of R202. So I thought I would unsolder it and low and behold TX on SSB come back in full. Not sure why they had an extra resistor there? So the only issue now at this time is the S meter. Its like it doesn't register anything under an S7. I replaced c35 and c98 twice and vr1 and still the same. I have also checked it with a new meter and also still the same. Hopefully we can get this last part figured out. 73 Richard [/QUOTE]

Top Bottom