-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
SBE Mic Wiring to Kenwood TS 450
- Thread starter Mudfoot
- Start date
How many conductors is the cord on the SBE and how are the wires color coded? Usually pretty easy to figure out and there's little change of any damage through trial and error. It's hard finding documentation on old mics some times.
You're only going to use pins 1,2, 7 and 8 on the kenwood.
Pin 1: Mic +
Pin 2: PTT +
Pin 3: Dwn
Pin 4: Up
Pin 5: +8v (125ma max)
Pin 6: N/C (Rx Audio on Some Models)
Pin 7: Mic GND
Pin 8: Chassis GND