You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Shit amp. Those amps don't even have tuned input. That's the problem right there. Because the deadkey of the setup is affected by the jumper (due to lack of input tuning), it is lowering the deadkey (clearly seen on the wattmeter) which directly affects your modulated output, which clearly shows on the scope. That's why the scope shows severe overmodulation and flat topping on the 3 and 6 foot jumpers. Like CK stated, had the amp been a GOOD ham amp with real input tuning, it'll look the same, regardless of the jumper.

~Cheers~

[QUOTE="ExitThirteen, post: 523363, member: 6878"] Shit amp. Those amps don't even have tuned input. That's the problem right there. Because the deadkey of the setup is affected by the jumper (due to lack of input tuning), it is lowering the deadkey (clearly seen on the wattmeter) which directly affects your modulated output, which clearly shows on the scope. That's why the scope shows severe overmodulation and flat topping on the 3 and 6 foot jumpers. Like CK stated, had the amp been a GOOD ham amp with real input tuning, it'll look the same, regardless of the jumper. ~Cheers~ [/QUOTE]

Top Bottom