• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Shortwave FREQ help

biferi

Member
Jul 29, 2008
66
0
16
Frequencies above 13,000 kHz is best during the day to get in so that would be the LOWER MITTER BAND right??
And Frequencies below 13,000 kHz is best at night to get and that would be HIGHER METTER BAND right??
 

There's no hard and fast rule about what time of day is best for which frequencies/bands. Listen carefully and often. Generally, lower frequencies are better received after local sundown, at which time higher frequencies may not be active. It depends on the sunspot number, time of year, and many other factors.

Frequency and wavelength are inversely proportional: higher frequency = shorter wavelength. For example, the ten meter amateur band is at 28 - 29.7 MHz. Twenty meters is 14 - 14.35 MHz. 80 Meters is 3.5 - 4 MHz. Notice that as wavelength (what you're calling "mitter band") increases, the corresponding frequency or band of frequencies decreases.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.