Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Shortwave Radio DX-440

HavaV10

HavaV10

Active Member
May 24, 2023
170
36
38
57
Lake Havasu City, Arizona
Not sure if I'm posting to the correct forum. My issue I need help with. I have a in great condition Realistic DX440 shortwave receiver. It's off frequency by about 2Khz. Example 1070 Khz AM on the display, but 1072 Khz AM sounds tuned in the best. I wanted to know what the location on the pcb board to tune this radio back on frequency so that is tunes to exactly to what the LCD readout out reads. To tune into channel 37 LSB I have to go up 2 Khz to 27.377 Thanks for any suggestions.
 

Attachments

  • 20241224_102734.jpg
    20241224_102734.jpg
    1.7 MB · Views: 224
Last edited:

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom