Sirio Performer 5000 Mount

[RoadRanger]

I think I'm just going to use the 5000 Mag mount for the time.
I will think about this later.
Thanks for all the input.

 

[Dr_DX]

Good options thanks.
What if I wanted to loss the NMO and just go through the hole?
I think I would need something else as to not have the trunk bend with the wind speed pressure.

If you don't need to "angle" your antenna.

Get one of these:

WORKMAN SS750DH HEAVY DUTY HIGH POWER 3/8-24 LARGE STUD ANTENNA MOUNT w/ SO-239 | eBay

NEW Workman SS750HD super heavy duty steel stud antenna mount. High quality construction. Handles power upto 20KW. Accommodates standard 3/8-24 threaded antennas. SO-239 connector on base to accept coax cable.

www.ebay.com

and one of these:

https://www.amazon.com/gp/product/B077M3HX8R?tag=worradfor-20

Drill the hole out to 3/4", the dielectric on the mount is raised so the saw blade will stay centered and the Carbide teeth will dig into the underside of the trunk lid/deck for an excellent ground and zero flex. Install the insulator correctly (raised lip goes down into the hole to keep everything centered) and instead of the star washer I use a Stainless Steel flat washer (.5"ID x 1.25"OD x .085") to evenly distribute the load across the insulator and weatherproof it at the same time.

 

[Enterprise312ok]

I have the Sirio 4000 mag mount on my wife's car and the sirio mag base is the strongest I have ever used.

 

[hotrod]

Isn't the coax shorter than 18 feet though

 

[RoadRanger]

Isn't the coax shorter than 18 feet though

Yes, I added to it.
I'm getting 1.5 to 1.7 on 10 & 11 meters.