Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Standard SMD size in Qixiang radios ?

D

Dr_DX

Senior Member 861 Down around the Alamo
I Support WorldwideDX.com!
Jan 29, 2006
622
989
103
64
Texas
What size standard (50v) SMD's are used in the latest Qixiang Radios? 0402, 0603, or 0805?

Thanks
 
  • Like
Reactions: Eldorado828

Dr_DX said:
What size standard (50v) SMD's are used in the latest Qixiang Radios? 0402, 0603, or 0805?

Thanks
Click to expand...
Great question and would be very helpful to many of us. A while back I was looking up some of the basic smd assortment kits but with so many options I didn't want to order them after guessing incorrectly.
 
Good question. I griped about having to duplicate parts inventory for through-hole and SMT resistors and caps. Turns out it's five or six times that bad, as the SMT parts continue to shrink and shrink.

73
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom