• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Station Pics

KJ4VRQ

W9WDX Amateur Radio Club Member
Sep 9, 2013
86
24
18
Yaesu - 897
HamPros NS-508 Desk Mic
MFJ-971 Antenna Tuner
 

Attachments

  • station.JPG
    station.JPG
    428.9 KB · Views: 571
  • station2.JPG
    station2.JPG
    417.3 KB · Views: 608
  • Like
Reactions: 2 people

its really not an issue with me, but,.........

some kilocycle cops might have an issue with your choice of frequency.:w00t:

of course, there is no regulation about listening to that freq (wink wink).

personally, if it were me, I would post a different pic. YMMV
 
its really not an issue with me, but,.........

some kilocycle cops might have an issue with your choice of frequency.:w00t:

of course, there is no regulation about listening to that freq (wink wink).

personally, if it were me, I would post a different pic. YMMV

I am sure he is just monitoring... nice clean station.
 
  • Like
Reactions: 1 person
Monitoring this afternoon. I have a separate cb radio for that. Plus, I don't have that radio modded to transmit on those frequencies anyway...




Sent from my iPhone using Tapatalk
 
  • Like
Reactions: 1 person
Nice clean setup. :thumbup1: How do you like the desk mic? I've seen them for sale at a "local" shop here in Texas.

73,
Brett
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.