• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Still More 40M RadioFun

BJ radionut

6m addict
I Support WorldwideDX.com!
May 9, 2008
4,798
5,923
623
35 miles East of Indianapolis
Had a couple Great Contacts this morning while trying to pour down the coffee:

VK3CKL...KEVIN/Dandenong Victoria,AUSTRALIA...We carried on for over
25 minutes from 10:08Z- 10:32Z
Kevin was 59 and up to 10-15 over S9 through the whole chat. He was running an older JRC rig and a wire beam at 400W....MONSTER SIG!/Great Audio:D
I was using my "Backfire" Phased dipole array and about 400W...my report from him was 58 to 59 with nice audio reports for my FT-950.

Also had WA6GPW/Nick/Dallas,TX working with us...He was running a Hustler Vertical with only 4 radials and made the trip to Kevin.

Then this chap called:
VK7FMTX...STEVEN/TASMANIA,ISLAND at 10:35Z...he was also very nice copy with 57-58 signal....He gave me a report of 59 on my rig...:thumbup1:

Been along time since I worked a station from Tasmania...Great fun on good old 40m...band was pretty cool...Nick(Dallas,TX) reported he had been up most of the night working Europe on his vertical...
Well off to 75m and get another cup of Java
All the Best
BJ/W9FNB/Gary
 

wow!! :w00t:

Those are some great contacts !! I am just catching europe here in Missouri,and 40 meters is just regional for me...Have yet to hear down under here :bored:

17 and 20 are rolling for europe though just after daylight till about noon
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.