• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

stock mike help.??

1iwilly

Sr. Member
Dec 7, 2008
916
655
103
64
use a stock mike on all my mobile radios is there a way to add a little base to a stock mike
people say it sounds good and clear loud but has a little tiney sound to it>??
 

Not without either modifying the mic or adding external equalizing equipment. It's easier to just get a different mic.
 
I've modded a d104m6b hand held by replacing the 270k ohm resistor with a 100k ohm in series with a 2 meg pot and achieved what you're asking and it is adjustable.

antennapics021.jpg
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello