• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

stock mike help.??

1iwilly

Sr. Member
Dec 7, 2008
915
653
103
64
use a stock mike on all my mobile radios is there a way to add a little base to a stock mike
people say it sounds good and clear loud but has a little tiney sound to it>??
 

Not without either modifying the mic or adding external equalizing equipment. It's easier to just get a different mic.
 
I've modded a d104m6b hand held by replacing the 270k ohm resistor with a 100k ohm in series with a 2 meg pot and achieved what you're asking and it is adjustable.

antennapics021.jpg
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.