• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Stryker 955 v2

my2995dx

Active Member
Apr 2, 2005
296
74
38
lancaster pa
On the Stryker 955v2 the main circuit board where the mic jack plugs into.I know there marked 1-4 on the board it self now 1 is that still audio.
 

1 - shield
2 - audio
3- tx
4- rx but rx may not be used.

It's the standard 4 pin galaxy cobra

These are the mic pins though, you'll have to trace them on the radio board because they may have them labeled different, I don't know.
 
1 - shield
2 - audio
3- tx
4- rx but rx may not be used.

It's the standard 4 pin galaxy cobra

These are the mic pins though, you'll have to trace them on the radio board because they may have them labeled different, I don't know.
There not labeled on board but found that #3 is the audio on the main board
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.