• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Stryker sr655 v2 NPC modification

Dec 19, 2020
28
1
13
Hello all, just wondering if anyone out here has the NPC mod for the Stryker sr655 v2 radio, the mod that allows low dead key and full power swing, any help is much appreciated for sure, thanks for looking
 

Hello to you and thank you for responding, here is the issue, I had the sr955 version 1 and they say it's thsame board as this sr655 minus all the stuff for side band but this board is no where near the sr955 board, there are no potentiometers for adjust of carrier like the sr955 had I will send a picture of this board, and it looks like someone added something to the board, I got the radio from a friend who purchased it new and sent it out to have this modification done to it, it was supposed to do something with the carrier but it actually does nothing noticable check this out, what would this modification be doing? I googled the board part number and it said it was a v2model 655
 

Attachments

  • 17728309692044895406261870675317.jpg
    17728309692044895406261870675317.jpg
    2.3 MB · Views: 2
  • IMG_20260306_161458689_AE.jpg
    IMG_20260306_161458689_AE.jpg
    1.1 MB · Views: 2
  • IMG_20260306_161454379_AE.jpg
    IMG_20260306_161454379_AE.jpg
    1.1 MB · Views: 2

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.