I have a Uniden PC68LTW that started motor boating on the WX board. I have narrowed down the culprit to what I am sure is a defective cap. (the cap doesn't build up anything when tested with a multimeter/shows continuity for a split second then shows nothing, even after I unsoldered from the board)
The cap is a 50 V. 10 microfarad cap. I have a few old radios sitting around that have 10 MF 16V caps. In the meantime I am going to have to special order my cap off Rat Shack's website.
For testing purposes, you don't suppose one of the 10 MF 16 V caps would work would you?
The cap is a 50 V. 10 microfarad cap. I have a few old radios sitting around that have 10 MF 16V caps. In the meantime I am going to have to special order my cap off Rat Shack's website.
For testing purposes, you don't suppose one of the 10 MF 16 V caps would work would you?