Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Superstar 3900HG 10 Meters

J

jonbah

Active Member
Apr 2, 2005
163
3
26
Good Ole US of A
www.jonbah.com
My 3900HG currently covers 25 something to 28.3 Can the band spread be modified to cover more of the 10 meter and less of the lower stuff. Maybe just jump up 1 band to cover to 28.8 . I've heard about crystal changes or can this be done with a jumper.? I'd rather cover 26.965 (ch 1) to the 10 meter band. I don't use any low channels.

Any help would be good.



Thanks

CDX-22

Jonbah


</p>
 

My 3900HG currently covers 25 something to 28.3 Can the band spread be modified to cover more of the 10 meter and less of the lower stuff. Maybe just jump up 1 band to cover to 28.8 . I've heard about crystal changes or can this be done with a jumper.? I'd rather cover 26.965 (ch 1) to the 10 meter band. I don't use any low channels.

Any help would be good.



Thanks

CDX-22

Jonbah


</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom