Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

T/S DX500V SSB question

moose

moose

No good can come of this.
Nov 29, 2009
127
5
28
New Orleans, LA -ish
Recently, even with the delay on it is having a hard time staying keyed during SSB xmitting. It wont chatter but it will unkey if I wait too long between words. Any ideas?

Thanks!
 

It sounds to me like it's working fine. Has there been a reduction in background noise while you're operating or did you reduce the mic gain? If so, that would explain why the relay is kicking off between words more often.
 
I've been talking on a 636L as I lent out my 878DM and never got around to changing the end on the D104. You might be right that is the noise canceling mic. The DX has been so good down here I have just had the 636L on it to talk.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom