You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Those are nice little AM bases and will tune up very nicely. what you can do for talkback is this (beings there no P.A. jack) , Take a 100 ohm resistor and attach it to the ground side of the front firing speaker on that unit to the boards ground, Walla !! you have talkback !! (you can add a little wire to it if it doesn't reach the board) high ohms for less or lower ohms for more talkback volume , there's other ways to do it but that should work in a pinch.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.